Todays deals on Thermal Fuse?

Elmwood Sensors Thermal Cut-Off, (Sensor/Fuse) 216 C, 420 F, (-whole box-) $650.00

Microtemp 15A / 15AMP Thermal Fuses – Large Wholesale Lot of 200+ pcs $74.95

100 Pcs SF152E Microtemp Thermal Fuse 157 °C TF Cutoff $62.99

100 Pcs SF188E Microtemp Thermal Fuse 192°C TF Cutoff $62.99

100 Pcs SF214E Microtemp Thermal Fuse 216°C TF Cutoff $62.99

100 Pcs SF226E Microtemp Thermal Fuse 227°C TF Cutoff $62.99

100x Microtemp Thermal Fuse SF139E 142°C 142 TF Cutoff $49.80

100x Microtemp Thermal Fuse SF152E 157°C 157 TF Cutoff $49.80

100 x Microtemp Thermal Fuse SF188E 192°C 192 TF Cutoff $49.80

100 pcs Microtemp Thermal Fuse SF119U 121°C 121 TF Cutoff $49.80

200 pcs Microtemp Thermal Fuse 130°C TF Cutoff 10A 250V $42.50

50 pcs Microtemp Thermal Fuse 240°C TF Cutoff SF240E $49.99

50 pcs Microtemp Thermal Fuse 227 °C TF Cutoff SF226E $49.99

50 pcs Microtemp Thermal Fuse 216 °C TF Cutoff SF214E $49.99

100 pcs Microtemp Thermal Fuse 216 °C TF Cutoff SF214E $49.99

Lot 15 Stemco Thermal Fuse 170635 $45.00

100x Microtemp Thermal Fuse SF129E 133°C 133 TF Cutoff $37.35

100pcs NEC SF99E Microtemp Thermal Fuse 101°C TF Cutoff $37.35

100 pcs Microtemp Thermal Fuse 94°C TF Cutoff NEC SF91E NEW $37.35

395-400 Jefferson Saf-T-Lag Thermal Fuse 400-Amp 250V $34.99

100 pcs Microtemp Thermal Fuse 142°C TF Cutoff 10A 250V $44.99

100 pcs SF169E Microtemp Thermal Fuse 172 °C TF Cutoff Free Shipping $44.85

60 Pcs Microtemp Thermal Fuse 227℃ TF Cut-off 10A 250V $43.75

ELMWOOD D125-002 THERMAL FUSES 128°C/262°F 15A (100 PCS) $33.00

ELMWOOD D149-930 THERMAL FUSES 152°C/305°F 15A (100 PCS) $32.00

NEW GE RTN1L THERMAL OVERLOAD RELAY 4.0-6.3A 20AMP FUSE 15 AMP BREAKER $37.50

100 pcs SF96E Microtemp Thermal Fuse 99 °C TF Cutoff new $37.42

100 pcs Microtemp Thermal Fuse 113 °C TF Cutoff SF109E 250V 10A Free Shipping $37.35

100pcs SF70E Microtemp Thermal Fuse 73°C TF Cutoff NEW $37.12

100 Pcs Microtemp Thermal Fuse 185℃ TF Cut-off 10A 250V $36.65

100 Pcs Microtemp Thermal Fuse 192℃ TF Cut-off 10A 250V $35.71

50 Pcs SF152E Microtemp Thermal Fuse 157 °C TF Cutoff $34.99

50 Pcs SF188E Microtemp Thermal Fuse 192°C TF Cutoff $34.99

50pcs Microtemp Thermal Fuse 172°C TF Cutoff NEC SF169E $34.99

50Pcs Microtemp Thermal Fuse SF139E 142°C 142 TF Cutoff $34.90

100 pcs Microtemp Thermal Fuse 115°C TF Cutoff 10A 250V $24.90

50Pcs Microtemp Thermal Fuse SF188E 192°C 192 TF Cutoff $34.90

5pc x13items Microtemp Thermal Cutoffs Fuse G4A00 72℃~257℃ 72C~257C 10A 250V $27.50

50 pcs Microtemp Thermal Fuse 99°C TF Cutoff SF96E $34.59

50 pcs NEC SF99E Microtemp Thermal Fuse 101°C TF Cutoff $34.50

MICROTEMP THERMAL CUTOFF L37-941 OPEN TEMP 306F. $34.00

MICROTEMP THERMAL CUTOFF 54J4701 OPEN TEMP 333F. LENNOX $34.00

50 pcs SF70E Microtemp Thermal Fuse 73°C TF Cutoff NEW $34.00

50 pcs Microtemp Thermal Fuse 121 °C TF Cutoff SF119U Free Shipping $29.99

100 pcs Microtemp Thermal Fuse 185°C TF Cutoff 10A 250V $29.99

50 Pcs Microtemp Thermal Fuse SF152E 157°C 157 TF Cutoff $29.99

50 pcs Microtemp Thermal Fuse 94°C TF Cutoff SF91E Free Shipping $29.59

ELMWOOD D125-002 THERMAL FUSES 128°C/262°F 15A (50 PCS) $22.00

30 x Microtemp Thermal Fuse 77℃ 10A 250V SF76E Cut-off $27.89

50pcs Microtemp Thermal Cutoffs Fuse G4A00 144℃ 144C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 229℃ 229C 10A 250V $20.50

50pcs DYE Thermal Cutoffs Fuse DF84S 84℃ 84C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 072℃ 072C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 077℃ 077C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 093℃ 093C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 121℃ 121C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 152℃ 152C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 167℃ 167C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 192℃ 192C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 240℃ 240C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF113E 113℃ 113C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF129E 133℃ 133C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF139E 142℃ 142C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF152E 157℃ 157C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 117℃ 117C 10A 250V $20.50

50pcs DYE Thermal Cutoffs Fuse DF184S 184℃ 184C 10A 250V UL VDE ThermTrol $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 184℃ 184C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF226E 227℃ 227C 10A 250V $20.50

50pcs Microtemp Thermal Cutoffs Fuse G4A00 257℃ 257C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF96E 99℃ 99C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF214E 216℃ 216C 10A 250V $20.50

50pcs Sefuse Thermal Cutoffs Fuse SF169E 172℃ 172C 10A 250V $20.50

50pcs DYE Thermal Cutoffs Fuse DF141S 141℃ 141C 10A 250V UL VDE ThermTrol $20.50

50pcs DYE Thermal Cutoffs Fuse DF98S 98℃ 98C 10A 250V UL VDE ThermTrol $20.50

40pcs Microtemp Thermal Fuse 113°C TF Cutoff SF109U 250V 10A Free Shipping $25.99

60 Pcs Thermal Fuse 240℃ TF Cut-off 10A 250V SF240E $24.83

50 Pcs Thermal Fuse 73℃ TF Cut-off 10A 250V SF70E $24.83

60 Pcs Thermal Fuse 101℃ TF Cut-off 10A 250V SF99E $24.83

60 Pcs Thermal Fuse 113℃ TF Cut-off 10A 250V SF109E $24.83

60 Pcs Microtemp Thermal Fuse 130℃ TF Cut-off 10A 250V $24.83

60 Pcs Microtemp Thermal Fuse 185℃ TF Cut-off 10A 250V $24.83

60 Pcs Microtemp Thermal Fuse 227℃ TF SF226E 10A 250V $24.83

60 Pcs Thermal Fuse 133℃ TF Cut-off 10A 250V SF129E $24.83

20 pcs Microtemp Thermal Fuse 227°C TF Cutoff SF226E $23.99

60 Pcs Microtemp Thermal Fuse 216℃ TF SF214E 10A 250V $23.95

60 pcs Thermal Fuse 172℃ TF Cut-off 10A 250V SF169E $23.91

50 pcs Microtemp Thermal Fuse 94℃ TF Cut-off 10A 250V $22.99

60 Pcs Microtemp Thermal Fuse 192℃ TF Cut-off 10A 250V $22.99

60 Pcs Thermal Fuse 121℃ TF Cut-off 10A 250V SF119E $22.60

60 Pcs Thermal Fuse 142℃ TF Cut-off 10A 250V SF139U $22.60

60 Pcs Thermal Fuse 99℃ TF Cut-off 10A 250V SF96E $22.60

50pcs Microtemp Thermal Fuse 113 °C TF Cutoff SF109E 250V 10A Free Shipping $22.49

ELMWOOD D149-930 THERMAL FUSES 152°C/305°F 15A (50 PCS) $18.00

ALLEN BRADLEY 193-BSB30 THERMAL OVERLOAD RELAY ***XLNT*** $14.00

MASTER APPLIANCE THERMAL FUSE TERMINALS & SHRINK SLEEVE KIT 50927 NEW 46750927 $15.00

25 Pcs Microtemp Thermal Fuse 94°C TF Cutoff SF91E New $20.29

25 Pcs Microtemp Thermal Fuse 99°C TF Cutoff SF96E New $20.29

25 Pcs Microtemp Thermal Fuse 101°C TF Cutoff SF99E New $20.29

25 Pcs SF109U Microtemp Thermal Fuse 113°C TF Cutoff $20.29

25Pcs SF119U Microtemp Thermal Fuse 121°C TF Cutoff New $20.29

Thermal Fuse Questions

Understanding Infrared Camera Thermal Image Quality

Abstract

 

When looking to select an infrared camera, it is extremely important to better understand the attributes of these cameras that most impact the quality of the infrared images that are produced. This paper covers the three primary areas that influence thermal image quality: pixel resolution, thermal sensitivity and fixed pattern noise. Each area has a significant impact on thermal image quality.

 If you’ve purchased a digital camera in the past, your purchase was likely influenced by your belief that the number of pixels was the most important specification when trying to judge image quality between all the camera choices offered.  For anyone that reads Consumer Reports™ and their detailed evaluation of digital cameras you’ll appreciate that camera performance includes careful analysis of much more than the pixel count. Because a thermal camera is basically an image converter (radiant thermal energy to visible image), you need to understand what are the primary attributes that determine thermal image quality and how they each contribute to the image quality that you may be experiencing in your application.

Pixel Resolution  

The first consideration is the number of pixels. Today there are three resolution standards (some manufacturers’ cameras deviate slightly)

• Low Resolution -  160×120 (19,600 pixels)
• Medium Resolution – 320×240 (76,800 pixels)
• High Resolution – 640×480 (307,200 pixels)

 

How much resolution you need (verses want) is primarily determined by your application and by the value you give to image quality. When evaluating a digital camera with 5 verses 10 mega pixels most users will never benefit by purchasing a camera with 10 million pixels because they will never print the images on large enough paper where the resolution would provide better print quality. Whereas you will always print and display the full resolution of an infrared camera since the highest resolution available is relatively modest by today’s digital camera standards. Even at 640×480 pixel resolution a high definition thermal image will only take up a fraction of today’s computer displays and the resulting thermal image print quality will always be fully realized. Therefore when evaluating a thermal camera the number of pixel is relevant and increased resolution is the most significant consideration in improving image quality.  

Another benefit to high resolution is the ability to zoom into a scene and maintain good image quality. The majority of thermal cameras feature a standard optic with a horizontal field of view of approximately 25°. Regardless of pixel resolution the performance of a 640×480 camera set to 2X digital zoom is going to equal the performance of a 320×240 resolution camera with an optional (and often costly) 12° (2X) lens. If you anticipate the need for imaging objects at distances further than 20 feet you should consider the increased costs of a 2X lens for a 320×240 thermal camera when comparing the total costs between 320×240 and 640×480 systems.  

The second major issue that impacts image quality is thermal sensitivity. While there are a number of tests used to quantify this specification, thermal sensitivity basically defines how well the camera will image as you increase image contrast. Thermal sensitivity varies with object temperature, as object temperature increases the slope of the signal output of the detector increases with increased temperature. This means that the signal (increasing) to noise (fixed) ratio improves as you view hotter objects. However this is not usually a benefit because the applications where better thermal sensitivity can be exploited are low temperature (room temperature) applications where the thermal contrast (temperature delta within an image) is very low. Typical low thermal contrast applications include building diagnosis where the camera is imaging interior walls with very little temperature variations or emissivity differences and issues like moisture or insulation quality can only be visualized by increasing the contrast to the point where the cameras thermal sensitivity limits the useful temperature span settings.  

As you review published camera specifications you will see thermal sensitivity specifications range between 0.25°C (250mK) and 0.05°C (50mK). While you might consider a quarter of degree to be adequate thermal sensitivity as soon as you look at a low contrast scene you’ll discover the image quality adversely effects the image quality as noise begins to dominate the image.  

Thermal imagers usually display images in palettes comprised of 256 discreet color or gray levels. Imagine your target has a temperature difference between 0°C and 256°C each gray or color level would represent 1 degree of temperature difference. Now apply this same color mapping into a scene with temperatures between 25°C and 35°C or 10 degrees. Each color now represents 0.03°C (10°C ÷256), a value lower than the most sensitive uncooled cameras. The result is some display of noise. There are many applications in which it is very important to set the span as narrow as possible in order to see the smallest temperature variations possible. If you are using a camera with 0.25°C sensitivity and wanted to maintain the same level of noise you would have to set a temperature range of 65°C (150°F) which would likely result in a very low contrast image. You should recognize that the difference between a camera with 50mK sensitivity verses a camera with 100mK sensitivity is 100% better and not as 0.05°C better.  

Thermal Sensitivity  

NETD is the scene temperature difference equal to either the internal noise of the detector (detector NETD) or the total electronic noise of a measurement system (system NETD). As a camera buyer you need to evaluate system NETD.   The test setup consists of temperature control blackbody reference and some type of ambient (passive) object that creates a simple slit target for the camera to visualize. The temperature of the black body is adjusted until it nearly equals the ambient target temperature. An oscilloscope measures the analog video output of one horizontal line and at the point where the temperature delta between the reference and the ambient targets no longer creates a measureable signal the NETD is determine by the measured temperature difference between the reference and the ambient reference targets.  

 

MRTD – Minimum Resolvable Temperature Difference

This is a system test. An observer is asked to assess the minimum temperature difference at which a 4 bar target can be resolved by watching the video output displayed as the temperature set points of the reference and the ambient targets are brought close together. This minimum difference will change with the spatial frequency of the bar target used. A curve of MRTD against spatial frequency is obtained which characterizes the performance of the imaging system. Modern infrared imaging systems can have low spatial frequency MRTDs of tens of milli-kelvins.  

The benefits of large format cameras is significant we you combine the need for high sensitivity while viewing high spatial frequencies.

To simplify explaining the fundamentals of thermal sensitivity let’s focus on a single pixel of the infrared sensor in an uncooled infrared camera. Each pixel in an uncooled focal plane array image sensor is essentially a resistor fabricated using MEMS (micro electro mechanical systems).  

The basis structure of a thermal uncooled camera pixel is a microscopic bridge structure on which a thin resistor material and an absorbing layer have been deposited. Legs suspend the deck of bridge above an integrated circuit and provide electrical connection between the resistive bridge and the silicon readout circuit. The readout IC controls the voltage that biases the thin film resistor and multiplexes all the pixel signals out to the cameras imaging electronics.  

As infrared radiation is absorbed by each pixel its temperature changes as the photon energy (8-14 micron wavelength) is converted to heat which in turn changes the resistance of the pixel’s thin film resistor. The readout IC sends a voltage across each “micro bolometer” element and a signal proportional to heat absorbed by each detector is the basis of a real time video image.  

The electrical circuit of an infrared sensor is very simple, a voltage is turned on to each pixel and a change in resistance of the thin film resistor based on the pixels temperature is sampled and converted into a digital value. All analog signal carry some level of noise along with the signal generated by the sensor. The ratio of signal to noise strongly impacts the image quality of a camera because the noise level is usually a fixed amount and as the detector gain is increased the system will begin to display the signal noise and you’ll begin to see “snow” in the image.  

The signal level of this noise is commonly specified as Noise Equivalent Temperature Difference.

Like any electrical circuit there are a lots of opportunities for electrical noise to get into systems, but the quality (signal to noise) of the signal coming directly off the infrared pixel has the most impact on thermal sensitivity, since nearly all camera developers have access to the same electronic components with which to create a camera. Therefore the thermal sensitivity in large part is based on the quality of the infrared imager array.  

Other issues like the f number of the lens also impact thermal sensitivity. Your camera’s lens is likely ƒ1.0 (the focal length is equal to the lens diameter) which is considered a “fast” lens. By comparison the f number in your digital camera is likely between ƒ3 and ƒ5 while the cameras used in cell phones and other low cost systems can be as high as ƒ20! As application demands lead to longer focal length lenses it is practical to go to “slower” optics in order to reduce the size, weight and cost of telephoto lenses and trade off some thermal sensitivity. For example, an F1.4 optic will result in 2X reduction in thermal sensitivity and an F2.0 optic a 4X reduction in thermal sensitivity. Therefore a system with 50mK sensitivity using a standard lens will still maintain good sensitivity (100mK) when a ƒ1.4 telephoto lens is attached to the camera verses another camera whose thermal sensitivity started at 100mK and becomes 200mK when viewing through a “slower” (ƒ number higher than 1).

 

As you can see from the various issues raised within this paper the nature of thermal sensitivity is very complex but in the real world the human eye is extremely good at differentiating small differences in image quality that you’ll know it (good sensitivity) when you see it.  

 

Non-Uniformity Correction

As the number of pixels increases and their sensitivity improves the quality of image is increasingly dependent on a process called Non Uniformity Calibration or NUC. As we described earlier a microbolometer imaging array is essentially an array of tiny resistors, and because of the micro scale of these devices, there are variations in how each pixel responds to the infrared energy from an object.   During manufacturing the infrared camera’s sensor must be normalized, meaning that the differences in response and DC output for each detector must be zeroed out. Thermal cameras typically feature an internal flag or iris that periodically is positioned in front of the detector as a constant temperature reference to zero out differences amongst the pixels. This is a fine tuning of the factory NUC process and is sometimes referred to as a “touch up.”

 

Because the touch up source is inside the lens, additional image quality improvements are possible when performing a touch up calibration through the lens either using a lens cap or exposing the camera to a large uniform surface. As camera performance improves the non-uniformities created by the lens will begin to be seen and for the ultimate image quality a simple through the lens calibration step will ensure the highest image quality the camera is capable of generating.  

 

Benefits of high increased image quality

• Much greater flexibility to inspect targets are varying distances
• Ability to visualize low thermal contrast targets
• More intuitive diagnosis of heat related problems
• Improved infrared visible fused image quality due to better matching of infrared and visible camera resolution..
• Flexibility to incorporate lower cost and lighter weight optional lenses
• More intuitive diagnosis of temperature anomalies  

 

For full article with images and reference material, please visit www.electrophysics.com/tiqab

 
For more comprehensive White Papers visit our online Knowledge Center www.electrophysics.com/thermal-imaging

About the Author

Electrophysics – IR Cameras for Thermography Professionals
373 Route 46, Fairfield, NJ 07004 Phone: 973-882-0211 Fax: 973-882-0997

Thermal Fuse Videos

Thermal Fuse Testing

We hope the information that we provided on Thermal Fuse was what you were looking for!