Todays deals on Relay Unit?

multi-amp sr-76a relay tester unit #1 $2,500.00

OMRON C200HW-SLK24 SYSMAC PLC LINK UNIT REFURBISHED $1,499.00

MITSUBISHI SERVO DRIVE UNIT MDS-A-SVJ-10 Free Ship $999.00

Keithley 9611-122-03A Relay Matrix Unit (RMU) $899.99

Omron Link Terminal Relay Unit B7A-A02 NIB (2984) $799.00

OMRON C200HG-CPU43-E PLC CPU UNIT 16K W RS232 880 I/O $699.00

NEW Allen Bradley 852S-A Solid State Timing Unit $700.00

Mitsubishi MDS-B-SVJ2-03 Servo Drive Unit Free Ship $664.00

Edwards Model 2041 Controller, (2) Relay Units & (1) Opto Unit, 220/240V $575.00

SQUARE D CC 74.6, OVERLOAD RELAY THERMAL UNIT, LOT OF (5) NIB  $39.00

URC Utility Relay Company AC-PRO AC Trip Unit $519.99

UNITED TECHNOLOGIES BACHARACH DUAL CHANNEL CONTROL $500.00

OFFER & WIN- OMRON G9S-321-T Safety Relay Unit $400.00

4635 NEW Allen-Bradley 1745-E105 Relay Expansion Unit $467.78

New Idec FC1A-E1A1E Source Input Relay Output Expansion Unit 100-240VAC $449.99

NEW IN BOX OMRON G9SA-501 SAFETY RELAY UNIT 24VAC/DC $449.99

ALLEN BRADLEY RELAY OUTPUT EXPANSION UNIT 1745-E105 $400.00

Allen Bradley Expansion Unit Relay SLC100 1745E105 LNC $300.00

Allen Bradley 440R-S35001 /A Safety Relay / CU3 Control Unit *60 DAYS WARRANTY!* $343.94

OMRON PLC CQM1-CPU11 24VDC CPU UNIT REFURBISHED Warrant $299.00

OMRON PLC CQM1-CPU11-E 24VDC CPU UNIT REFURBISHED $299.00

Allen Bradley #1762L24BWA & #1762OW8 MicroLOGIX 1200 Relay Unit $300.00

Idec FC2A-DA2 FC2ADA2 Micro 3 D/A Unit $279.00

GUARDMASTER SAFETY RELAY UNIT MSR10 RD *NEW* $300.00

ALLEN BRADLEY MINOTAUR SAFETY RELAY UNIT MODEL MSR6R/T $279.99

New: LFE Meter Relay Control Unit #8889-0003 $265.00

Guard master Minotaur MSR15D Safety Relay Unit $250.00

AEG LS17 CONTACTOR RELAY ASSEMBLY NEW LOT OF 8 ASSEMBLIES 2 UNITS WITH HS17 $250.00

One Euchner CES-A-AEA-04B Safety Unit Free Ship $274.00

ROBICON SCR GATE TRIGGER UNIT P/N 304 057-3 480V 60HZ $245.00

Lot of 18 Square D Overload Relay Thermal Unit B 6.25 B6.25 New In Box! $260.00

NEW AB ALLEN BRADLEY 440R-J23044 GUARDMASTER MINOTAUR MSR11R SAFETY RELAY UNIT $256.50

OMRON SAFETY RELAY UNIT~g9s-2001~ new!! $250.00

Utility Relay Company AC-PRO AC Trip Unit $250.00

ALLEN BRADLEY GUARD MASTER UNIVERSAL SAFETY RELAY UNIT. MSR 10RD, MSR10RD $255.00

10 UNITS OF POTTER & BRUMFIELD T92S7A22 -240 Circuit Board Relay $229.00

SQUARE D OVERLOAD RELAY THERMAL UNIT 8810 SCA2 *NEW* $250.00

Used URC Utility Relay Company AC-PRO-VST Direct Replacement Trip Unit AC Trip $249.00

Used URC Utility Relay Company AC-PRO AC Trip Unit Minro-Controller Based $249.00

UTILITY RELAY COMPANY AC-PRO AC TRIP UNIT ****XLNT**** $229.00

CUTLER HAMMER HKB3125T TRIP UNIT 125A 40C NNB!! $225.00

STI SR06AM Universal Safety Dual Channel Relay Unit $215.50

Datum 9610 Terminal Timing Unit $229.38

SCP GLOBAL TECHNOLOGY 3270171G AUXILIARY RELAY UNIT $199.00

ALLEN-BRADLEY AC RELAY W.PNEUMATIC TIME DELAY UNIT 700-PT200A1 5945-01-434-8841 $225.00

Koyo SZ-3 SZ3 CPU Unit $188.00

ITE Power Shield Solid State Trip Unit Type SS3 Used $175.00

OMRON G9SB -3012 -C SAFETY RELAY UNIT $219.99

Allen Bradley 700-PT200A1 700-P200A1 Relay Pneumatic Time Delay Unit Ser/D *New* $199.00

OMRON C20P-EDR-D PLC I/O UNIT 24VDC OUT 24VDC /250VAC $199.90

OMRON C500-OC224-E SYSMAC PLC OUTPUT UNIT 32 POINT 2A/P $199.90

OMRON C200H-OA222 PLC 12 POINT OUTPUT UNIT 100-240VAC $200.00

New Idec FC1A-MXAE 3 Relay Output Micro-Expansion Unit $199.99

OMRON C200H-IDS01-V1 SYSMAC PLC ID SENSOR UNIT REFURBIS $199.00

GE TJKYT36 TRIP UNIT 3POLE NON-AUTOMATIC 600A $200.00

1 USED HEATED TANK CONTROL UNIT COMPLETE UP 1102 $200.00

Cutler-Hammer EATON E66PN control unit 120/240v A1 NEW! $207.86

Mitsubishi A6TE2-16SRN Relay Terminal Unit AC240V DC24V 2A NEW $199.99

Siemens S07ED60 Shunt Trip Undervoltage Unit Solid State Relay 2.20a 24v DC New $205.00

2 UNITS OF G-V Thermal Time Delay Relay RO-40 115V 40 SEC $180.00

FESTO DFM-50-100-P-A-GF 170874 GUIDE UNIT P MAX 10 BAR SN08 $200.00

omron sysmac C200H progammable controller with base unit $180.00

OMRON C200HW-CLK21 SYSMAC PLC CONTROL LINK UNIT REFURBI $179.90

WESTINGHOUSE HKB3125T TRIP UNIT 125A 40C 3-POLE NNB!! $185.00

Sti Scientific Technologies EC-S4 unit, 24vdc 44537-004 $175.00

Leukhardt time delay unit BK MIKRO 7, 8070301 LOT OF 5! $175.00

NEW LFE METER RELAY 1952 WITH CONTROL UNIT 8889-3003 $175.00

HP Agilent 3488A Switch / Control Unit w/ 5 Modules 44471A 44470A Relays + Block $149.99

Omron G9S-2002 G9S2002 Safety Relay Unit 24VDC $116.63

OMRON 24VDC SAFETY RELAY UNIT G9SA-301 $175.00

New: LFE Meter Relay Control Unit #8889-0003 $165.00

ELECTROID CONTROL UNIT RELAY 90 VDC 1.5 AMP MODEL CP-500 105d-ak $179.95

AC PRO TRIP UNIT UTILITY RELAY COMPANY $159.00

Schleicher Safety Relay: SNE 4004K expansion Unit $166.40

SIEMENS RELAY ADABLE ACCESSORY UNIT PART # S07ED60 NSN: 5945-01-436-0836 $175.00

OMRON G9SA-301 SAFETY RELAY UNIT AC/DC24V 0842E $170.00

ABB ASEA Fuse Unit YKBA 70-15 YT 212 001-BR YT212001-BR Clean!! $150.00

STI SR122E Safety Monitoring Relay Expansion Unit 24V SR122E01 Light Curtain $149.99

GUARD MASTER 2 HAND CONTROL LOGIC UNIT 24 V MODEL MSR7C $149.99

ALLEN-BRADLEY 196-FTB TIMING UNIT SERIES B $150.00

Phoenix Contact 24 VDC or AC Safety Relay Unit 2963776 $150.00

Allen Bradley Pneumatic Time Delay Unit $110.00

LOT OF 29 NIB SQUARE D OVERLOAD RELAY THERMAL UNITS $155.00

Lot of 10 Units T7DU1.6 ABB THERMAL OVERLOAD RELAY 1.0-1.6 FLA NEW OEM PACKAGE $150.00

Micro Motion Relay Unit 3100A1AU $150.00

Badger 481 Remote Terminal Unit $147.00

SUNX SF1-SC AREA SENSOR CONTROL UNIT FAIL-SAFE $105.99

60 UNITS OF TELEDYNE RELAYS ER421 Relays M3-5B $120.00

*NEW* Omron Safety Relay Unit #G9SB-3012-A $139.00

OMRON G9SA-301 Safety Relay Unit 24 VAC/DC OMRON G9SA $120.00

ALLEN BRADLEY RELAY BOARD PROCESSOR UNIT MODEL 1745-R1 $129.99

Allen Bradley MSR7R 2 Hand Control Logic Unit $135.00

*NEW* Omron Safety Relay Unit #G9SA-501 $129.95

LFE MODEL 1967 DC VOLTMETER & RELAY CONTROL UNIT NIB!!! $125.00

Omron Floatless Level Switch 61F-G3 with 3 Relay Units 61F-11 $110.00

Omron Floatless Level Switch 61F-G1-OTE RELAY Unit NIB #FAST SHIPPING# $129.99

# Omron S3S-C10-US Controller Unit. 120/240VAC. $129.99

NEW TELEMECANIQUE CONTROL RELAY PNEUMATIC TIMING UNIT ! $129.95

OFFER & WIN- OMRON G9SA-321-T 075 Safety Relay Unit $100.00

Omron G9SA-301 Safety Relay Unit $127.49

Relay Unit Questions

Direct-Fired Industrial Makeup Air Units

Canada Blower Co. ia a developer of different types of gas-fired air makeup units for industrial building ventilation.

Gas-Fired Pressurization Units move large quantities of air at low temperature differentials (usually 50° or less), which is a strategy to minimize temperature stratification in the large spaces they are employed to heat. The equipment is typically mounted on the roof of the facility or at grade on elevated supports to ensure that the supply air is delivered high. The high air delivery allows for a longer “throw” of the air, thereby requiring less equipment to cover the required floor area. The most common fuel is natural gas, however, units can be converted to burn propane. There are two primary categories of gas-fired AHUs: indirect-fired and direct-fired.

Indirect-fired units burn the fuel and air mixture inside of a heat exchanger while the air traveling to the space passes over the outside of the heat exchanger. In this design, the products of combustion travel through a vent to the outside of the building.

Direct-fired units utilize air that will be sent to the heated space for combustion without use of a heat exchanger. The products of combustion are mixed directly with large volumes of outdoor air. Such mixing is considered safe because of the high dilution ratio.

In addition, thorough burning of the natural gas takes place so that no harmful products of combustion enter the airstream. One product of combustion is water vapor, which can be problematic with very tight building construction due to the potential for condensation in colder climates. For tight buildings, it is best to consider the use of indirect-fired equipment. There are several common configurations of direct-fired units.

The 80/20 design can vary the quantity of outside air from 100% down to 20%. The burner has a high turndown ratio and only outside air should be drawn across the burner. The discharge air volume is fixed and the quantity of outside air can be adjusted to maintain building pressurization. The makeup air unit configuration is ideal for supplying large quantities of replacement air for facility exhaust systems. Such systems can include paint spray booths and other industrial exhaust applications. These units supply a fixed amount of 100% outside air. Air Recirculation units recirculate a fixed 80% of the air while bringing in 20% outside air that passes over the burner. They supply a minimum amount of ventilation to spaces that do not require large quantities of outside air to maintain building pressurization.

Variable Air Volume VAV units have a varying supply air volume and work similar to the 80/20 design, however, the recirculated air passes through a bypass section instead of through the facility. This type of unit is used in applications where building pressurization is desired and where contaminants located in the space cannot be recirculated.

Facilities that have indoor vehicle operation frequently accumulate carbon monoxide and associated noxious fumes. For such instances, a ventilation sequence can be instituted to limit this potentially harmful buildup. The pressurization units for these buildings could be fitted with a carbon monoxide detector with an initial setpoint of, for example, 50 ppm that would trigger an alarm and energize a time-delay relay.

If the condition still exists after, say, five minutes, then the return air damper would modulate closed and the outside air damper would modulate to the 100% open position. A second setpoint of 100 ppm would initiate an alarm and eventually de-energize the burner. The dampers would then be positioned to enable the exhaust mode. After the carbon monoxide returns to a safe level, the sensor could reset the unit to normal operation.

In addition to emergency ventilation to purge carbon monoxide, the pressurization unit can be used to provide a source of ventilation during warm and hot months of the year. A reverse acting thermostat would modulate the outside air and return air dampers to bring in more outside air to maintain the indoor setpoint. These units can also be fitted with either chilled water or DX cooling coils to provide tempered or conditioned air to the space during the summer.

Direct-fired pressurization units are approximately 93% efficient, with much of the available energy in the burned natural gas being delivered to the space in the form of heat. The supply airstream absorbs the heat that would be normally lost through a flue or vent pipe as in the indirect-fired configuration.

A feature of this type of equipment that is especially important in cold climates is its ability to keep the building slightly pressurized to typically at 0.01 in. wc. This reduces the infiltration of cold air, and when overhead doors are opened, the outside air dampers are modulated open to admit more air to maintain this level of pressurization. This feature also acts as virtual ductwork to distribute air where it needs to go: toward cracks or areas with open doors.

Direct-fired pressurization equipment is capable of delivering plenty of ventilation to a facility when it is configured as the 80/20 system described previously. Infrared systems, however, may need to be supplemented with a separate ventilation system.
With certain classes of facilities, the infrared system would not require additional equipment for ventilation, since large structures with many doors would provide enough natural ventilation through leakage.

Gas-fired pressurization systems each offer good solutions to heating large structures such as warehouses, distribution centers, aircraft hangers, and manufacturing facilities. Situations that require significant ventilation favor pressurization air handlers as do facilities that generate dust, mists, and other contaminants. Cleaner environments with less intensive ventilation needs would do well to go with the infrared radiant heating approach. In very cold climates, it might be beneficial to go with a hybrid solution using radiant heat at the perimeter as the primary heating source and placing pressurization units at the center of the facility for ventilation and for pressurization when doors are open.

Additional information can be found at the Canada Blower company web site http://canadablower.com/index.html.

Susan Terlitski
Industrial Air Make-Up Systems Engineer
Canada Blower
http://canadablower.com/ahu/index.html
http://canadablower.com/oem/index.html

About the Author

Canadian air-handling systems designer.

Mrs. Siouzanna Terlitskaia, nis-co@nis-co.com
Canadian Air Systems

http://nis-co.com

Relay Unit Videos

BMW iBus Relay Unit Demonstration

We hope the information that we provided on Relay Unit was what you were looking for!