Todays deals on Module Siemens?

SIEMENS 6DD1661-0AB0 COMMUNICATION MODULE NEW IN BOX $24,000.00

SIEMENS 6DD1602-0AE0 PROCESSOR MODULE NEW IN BOX $19,999.00

Siemens DCS Module 6DS1140-8AA New in box, seal opened Free Ship $14,000.00

SIEMENS 6DD1661-0AB0 COMMUNICATION MODULE $12,000.00

Siemens DCS Module 6DS1844-8FA New in box, Seal opened, Free Ship $12,000.00

SIEMENS SIMATIC S5 CPU MODULE 6ES5948-3UR23 C79458-L8002 CPU948R $10,499.00

SIEMENS SINAMICS POWER MODULE 240 6SL-3224-0BE38-8UA0 $8,650.00

SIEMENS 6DD1640-0AC0 EM11 I/O MODULE PG16 NEW IN BOX $7,500.00

Siemens,6ES5-242-1AA32,Counter Module S5-135/55 IP242A $7,500.00

SIEMENS SIMADYN EM11T I/O MODULE 6DD1640-0AD0 REMAN & TESTED $7,300.00

SIEMENS SIMADYN EM11T I/O MODULE 6DD1640-0AD0 $7,105.00

NIB SIEMENS 6ES5470-4UC12 OUTPUT MODULE 8 POINT ANALOG $6,850.00

SIEMENS ACTIVE LINE MODULE 6SL3130-7TE31-2AA3 $5,950.00

SIEMENS/MOORE QLCCM24AAN QUADLOG CCM+ MODULE 16418-41/1 $6,000.00

SIEMENS INTERFACE MODULE 6ES5 308-3UB1 NEW IN BOX $5,800.00

SIEMENS 6ES5 324-3UA12 IM324 INTERFACE MODULE NEW/BOX $5,700.00

SIEMENS 6ES5928-3UB21 CPU MODULE ***NIB*** $5,499.00

SIEMENS TI 555-1101 CPU MODULE NIB SEALED $4,999.99

SIEMENS 6DL3100-8AA PROFIBUS FRONT END MODULE A05 $4,999.00

SIEMENS PROFIBUS FRONT END MODULE 6DL3100-8AA 6DL3100 $4,999.00

SIEMENS 6DL3100-8AA PROFIBUS FRONT END MODULE A04 $4,999.00

SIEMENS 6DL3100-8AA PROFIBUS FRONT END MODULE A04 $4,999.00

SIEMENS/MOORE 39ACM24BBN 040/4M APACS+ CONTROL MODULE 16139-96/4 $5,000.00

NIB SIEMENS 6ES5470-4UC13 OUTPUT MODULE ANALOG 470 $5,000.00

SIEMENS 6DD2920-0AD0 LIGHT RECEIVER MODULE NEW IN BOX $4,700.00

SIEMENS INTERFACE MODULE 6DD1681-0CB2 NEW in BOX $4,500.00

SIEMENS 6DD1611-0AD0 MEMORY MODULE NEW/BOX $4,500.00

SIEMEN 6DD1681-0CA2 INTERFACE MODULE SE20.2 NEW/BOX $4,500.00

SIEMENS/MOORE 39NIM421BAN APACS NIM MODULE 16194-32/02 $4,500.00

Siemens Simodrive E/R Module IP 6SN1145-1BA00-0DA0 Version A _ T-JN2001692 $4,500.00

Siemens SIMADYN Processor with Memory Module 6DD1606-1AA0 6DD1610-0AG1 $4,500.00

SIEMENS 6DD1602-0AE0 PROCESSOR MODULE $4,040.00

SIEMENS/MOORE QLCCM12ABN CRITICAL CONTROL MODULE ****NNB**** $3,999.00

SIEMENS SIMADYN D SP22 6DD1683-0CC0 REV B POWER SUPPLY MODULE $3,999.00

SIEMENS 6ES5926-3SA12 CPU MODULE ***NIB-FS*** $3,999.00

NEW SIEMENS SIMODRIVE POWER MODULE 6SN1123-1AA00-0EA2 $3,887.60

SIEMENS SIMODRIVE INFEED E/R MODULE 6SN1145-1BA01-0BA2 $3,887.60

Siemens DCS Module 6DS1720-8AA New in Box, Seal opened, Free Ship $3,940.00

Siemens DCS Module 6DS1318-8AB New in Box, Seal opened, Free Ship $3,940.00

SIEMENS 6ES5-243-1AB12 ANALOG MODULE 6ES52431AB12 $3,800.00

OFFER & WIN SIEMENS SIMODRIVE 6SN1130-1DB42-0CA0 VSA-MODUL $3,400.00

SIEMENS TI 555-1103 CPU MODULE NIB SEALED QUANTITY!!! $3,499.99

SIEMENS/MOORE QLCCM12ABN CRITICAL CONTROL MODULE 16808-21 ****XLNT**** $3,499.00

NEW SIEMENS 6ES5-921-3WB14 INPUT MODULE 6ES59213WB14 $3,500.00

SIEMENS/MOORE 39ACM24BAN 040/4M APACS CONTROL MODULE 16139-76/09 $3,500.00

SIEMENS 6DD1601-0AE0 PROCESSOR MODULE PG16 $3,500.00

Siemens DCS Module 6DS1702-8AA New in Box, seal opened, Free Ship $3,400.00

6ES5-244-3AB31 SIEMENS TEMPERATURE CONTROL MODULE S5 IP244 F/115/135/155U $3,315.00

SIEMENS EA-12 ANALOG OUTPUT MODULE 6DD1642-0BC0 NEW/BOX $3,300.00

Siemens,6DD1642-0BC0,Analog Output Module SDYND EA12 $3,300.00

SIEMENS SIMATIC CPU MODULE 150 6ES5927-3SA11 927-3SA11 $3,199.99

Siemens DCS Module 6DS1601-8AC New in Box, Seal opened, Free Ship $3,200.00

New Siemens Simatic TI CPU Module 555-1101 Factory Seal $3,199.99

New Siemens 6ES5 095-8FB01 Module CPU Simatic S5-95F for REDUNDANT SYSTEM $2,997.00

SIEMENS/MOORE 39ACM24BEN/A5E00282001 ADVANCED CONTROL MODULE ****XLNT**** $2,999.00

SIEMENS/MOORE 39ACM24BDN/16139-205 ADVANCED CONTROL MODULE ****XLNT**** $2,999.00

SIEMENS/MOORE 39ACM24BEN/16139-215 ADVANCED CONTROL MODULE ****XLNT**** $2,999.00

SIEMENS MOORE PRODUCTS 15799-209 CPU MODULE ***NNB*** $2,999.00

SIEMENS 6ES5 324-3UR11 WATCHDOG MODULE NEW IN BOX $3,000.00

SIEMENS 6ES5 314-3UR11 INTERFACE MODULE NEW IN BOX $3,000.00

SIEMENS 6ES5 530-3LA12 COMMUNICATIONS MODULE NEW IN BOX $3,000.00

SIEMENS SIMATIC S5 155U 6ES5 948-3UA11 CPU948 CPU MODULE free ship $2,999.00

Siemens SIMATIC 6ES5246-4UA31 POSITIONING MODULE DC DRI $2,989.00

SIEMENS SIMODRIVE POWER MODULE 6SN1123-1AB00-0CA3 -NEW- $2,915.70

SIEMENS 6SL3130-6TE23-6AA3 sinamics s120 smart line module $2,799.00

Siemens DCS Module 6DS1327-8AA NEW in Box, Seal opened, Free Ship $2,940.00

NEW SIEMENS 6FC5110-0DB02-0AA2 6FC51100DB020AA2 BOARD MODULE VER T $2,900.00

SIEMENS 6DD1640-0AC0 EM11 I/O MODULE $2,900.00

SIEMENS 6DD1610-0AG1 SIMADYN D MEMORY MODULE NEW IN BOX $2,800.00

SIEMENS 6SN1123-1AA00-0KA1 LT Module INT 400A 1 Yr Wrty $2,700.00

Siemens 6ES5340-5AB32 Memory Module NEW $2,783.77

Siemens / TI 575-2103 CPU Module VME PLC Texas Instruments 5752103 $2,750.00

SIEMENS 6DD1641-0AC0 EB11 DIGITAL I/O MODULE NEW IN BOX $2,700.00

Siemens Simodrive HSA Module 6SC6116-0HA00_6SC61160HA00_6SC 6116-OHAOO $2,700.00

SIEMENS SIMATIC CPU MODULE 150 6ES5926-3SA11 926-3SA11 $2,499.99

Siemens, 6ES5-465-7LA13, Input Module Analog, NIB $2,550.00

Siemens LT Module 6SN1123 1AA00 0EA0 Version D Int 160a $2,500.00

SIEMENS SIMADYN S5 MODULE PN 6DD2920-0A00 $2,500.00

Siemens Module 6ES7 455-1VS00-0AE0 (6ES74551VS000AE0) $2,524.00

SIEMENS 6ES5247-4UA31 POSITIONING MODULE ***NIB-FS*** $2,499.00

SIEMENS INTERFACE MODULE 6ES5-318-8MA12 $2,450.00

SIEMENS 6ES5924-3SA12/6ES59243SA12 CPU MODULE ***XLNT*** $2,499.00

SIEMENS TI PLC CONTROL MODULE 6ES52524DB11 BRAND NEW S5 $2,500.00

SIEMENS SIMODRIVE 6SN1123-1AA00-0LA3 LT-MODUL INT. 108A FACTORY SEALED *NEW* $2,500.00

NEW SEALED SIEMENS 505-2557 16PT MODULE 5052557 $2,499.00

SIEMENS S5 6ES5 955-3NC13 POWER SUPPLY MODULE $2,498.00

SIEMENS/MOORE 39ACM24BAN/16139-76 ADVANCED CONTROL MODULE ****XLNT**** $2,399.00

Siemens DCS Module 6DS1701-8AB NEW IN Box, seal opened, Free Ship $2,400.00

SIEMENS 6GK1143-0AA01 COMMUNICATIONS MODULE NEW IN BOX $2,400.00

SIEMENS TI 545-1104 CPU MODULE * NIB SEALED $2,299.99

Siemens LT Module 6SN1123 1AA00 0EA0 Version E Int 80 A $2,300.00

SIEMENS SIMATIC PG COMM MODULE 6ES5511-5AA12 511-5AA12 $2,199.99

Texas Instruments 500 System PLC Series Rack 13 Modules $2,295.95

SIEMENS/MOORE 39ACM14CAN/16139-68 ADVANCED CONTROL MODULE ****XLNT**** $2,299.00

Siemens Simatic Optical Switch Module 6GK1105-2AB10 6GK11052AB10 6GK1105 TP62 $2,300.00

SIEMENS SIMO DRIVE LT MODULE 6SN1142-1AA00-0DA1 $2,200.00

SIEMENS 6ES5247-4UA31 POSITIONING MODULE ***NIB*** $2,249.00

Siemens SPS Modul 6FM1470-3BA20 Simatic S5 6FM14703BA20 $2,250.00

SIEMENS SIMATIC 386/ATM PROCESSOR MODULE MODEL 505/ATM-0220 $2,200.00

Siemens 6SN1123-1AA00-0EA1 Simodrive LT-MODUL $2,199.00

Module Siemens Questions

How To Program A Siemens S7-300 Programmable Logic Controller

Do you have a Siemens S7-300 Programmable Logic Controller that you are not familiar with but you need to program it NOW!  Following is a quick set of instructions I have put together to help you get started programming a Siemens S7-300 PLC.  I have these same instructions with pictures on my website at   www.saturdayafternoonhobbies.com 

After loading the programming software and connecting a Siemens MPI cable between your programming computer and the PLC, open SIMATIC Manager by clicking the icon on the desktop.  The STEP 7 Wizard: “New Project” window will open.  It is easier to use the Wizard to setup communications with your PLC, but I chose to take the scenic route.  I figured I would learn more this way.  So, close the STEP 7 Wizard window by clicking Cancel.  If there are any other windows or projects open, close them.  We want to start with a totally new program.

Create a new project by clicking the new project button on the toolbar in the upper left corner of your screen. 

The New Project window opens.  Here you will see any existing programs located on your computer.  Near the bottom of the window, you will see the Name: input form.  Type whatever you want to name your new project and click O

A new window will open showing the name of your project at the top.  You will also see your project in the window on the left hand side of the screen at the top.  Right click your project and choose “Insert New Object”.  Choose the device you will be programming.  We will be using the SIMATIC 300 Station so choose that selection. 

You will now see SIMATIC 300 appear in the right window of your screen.  It should be highlighted blue.  Click anywhere in the window to make the blue go away.   Double click SIMATIC 300 and it will move to the left window and “Hardware” will appear in the right window. 

Double click “Hardware” and two (maybe three) new windows will open.  On the left will be SIMATIC 300 – (the name of your project).  The window on the right will be the catalog of parts. 

Look in the right window, the parts catalog, and click the plus sign beside SIMATIC 300.

Click the plus sign beside RACK – 300.  Click and drag the Rail onto the left window.  You will now see the Slots window appear.  This is where we will place our PLC components

We will first choose our CPU.  Looking at the parts catalog, in the SIMATIC 300 tree, choose the CPU that you are using.  We are using the CPU – 300 so click the plus sign beside that choice. 

Now look at the front top left of your PLC.  This is where you will find the PLC model.  I will use CPU313C-2 DP as an example since this is the model PLC that I use. 

Find this CPU in your parts catalog and click the plus sign.  You will now see some part numbers. 

Look back at your PLC.  Locate the door covering the MPI port.  This will be the bottom left side of the PLC.   At the bottom of the door you will find the part number.  The part number for the PLC I am using as an example is 313-6CF03-0AB0.  

Find this part number in the parts catalog.  You will notice this is another folder.  Open it and you will see V2.0 and V2.6.  Look back at the PLC, open the door covering the MPI port, and right above the MPI port you will see V2.6.3. 

Go back to the parts catalog and click V2.6.  Notice how a slot in the left hand window will highlight green.  I believe it will be slot #2.  (Slot #1 is reserved for power supplies.)  This is where you will drag and drop your CPU.  (Notice the software will not let you put the CPU in any other slot but slot #2.) 

When you release the mouse button over slot #2, a new window will open, “Properties – PROFIBUS interface”.  Click new, a new window opens, click Ok, and then click OK again.  We are not setting up a network at this time. 

You will now see your CPU and associated hardware listed. 

Double click in the Slot that list your DI16/DO16 (Digital Input/Digital Output). 

A window with three tabs will open.  The first tab will be General, the second tab will be Addresses and the third tab will be Inputs. 

Open the tab “Addresses”.  We need to change the default addresses.  Do this by unchecking the System Default button and changing 124 (or whatever address you have) to 0.  Do this for both the Inputs and Outputs. 

We now need to change the Node Address.  Go back to the window where you double clicked DI16/DO16 and double click in Slot 2, the CPU 313-2DP slot. 

The Properties – CPU 313C-2DP window will open. 

Look down the window a little over half way and find the Interface area and click on Properties. Another window, “Properties – MPI interface CPU 313-2DP” will open.

Change the address to meet your specific criteria.  I know that my laptop, which I am using to program my PLC, is always addressed as 1 and my target PLC is usually addressed as 2.  You will probably be the same.  

Now click MPI(1) and click OK.  Click OK again to close the Properties window.

Save and Compile by clicking the icon located on the left of the toolbar. 

Download the hardware configuration to the PLC by clicking the download icon located on the toolbar. 

A window titled “Select Target Module” should open. Click OK.  

Another window titled “Select Node Address” will open.  You should see listed your node address for the PLC you are working with as you configured it in a previous step.  If not, click view and click on whatever node address appears and click OK.

Switch back to SIMATIC manager (by clicking the tab on the taskbar).

Click on Options.  Choose Set PG/PC Interface.  Choose PC Adapter (Auto). 

Click Properties.  A new window will open, displaying either Automatic Bus Profile Detection or Local Connection.  Click Local Connection and choose USB.  Now choose Automatic Bus Profile Detection and change the address to 30.  You can check your connection now by clicking Start Network Detection.  If a new window opens displaying Network Type = MPI, Transmission Rate = 187.5kbps,  you have established communications with your S7-300.  Click Close.  Click OK.  Click OK. 

It is now time to start programming.  Looking at the SIMATIC Manager window, click the plus sign located beside SIMATIC 300(1), click the plus sign beside CPU 313C-2DP, click the plus sign beside S7 Program(1). Now click on Blocks and you will see System data and OB1 appear in the right window on your screen. 

Double click on OB1 and a new window will open named Properties – Organization Block 

Here you can choose how you want to program, in LAD (ladder), STL (statement list), or FBD (function block diagram).  Choose which you want to use and click OK.

Double click OB1 again and the LAD/STL/FBD programming window will open. 

You can now start programming.

 

I have these same instructions with pictures on my website at   www.saturdayafternoonhobbies.com 

About the Author

My name is Robert K. Moore and I am an instructor at Piedmont Technical College.  I teach electronics and Mechatronics Technology classes.  My hobbies include working with a 1962 Chevy II convertible, hunting fossils, particularly sharks teeth and working with electronics.  Visit my site for more articles about these topics.  http://www.saturdayafternoonhobbies.com

 

Module Siemens Videos

Intersolar NA: Siemens 950 mln grant; CPV focus – Amonix, Soitec and SolFocus

We hope the information that we provided on Module Siemens was what you were looking for!